Hydraulic Drive Units
|
AR pumps are a combination of exceptional degree of technology and innovation, quality and reliability worthy of a leading brand on the market. The wide range includes many models which vary in terms of pressure, deliver, power and technical characteristics, to satisfy widely different market demands.
|
|
RK 1450 rpm - Hydraulic Drive Motor is 1/2" Inlet and Outlet - Pump is 1/2" F Inlet 3/8" F Outlet
|
 |
| HYD-RK15.20 |
|
|
Max GPM: 4 |
Max LPM: 15.1 |
|
Max PSI: 3000 |
Max Bar: 205 |
|
Motor GPM: 7.5 |
Motor LPM: 28.4 |
|
Motor PSI: 2500 |
Motor Bar: 170 |
|
|
XW 1450 rpm - Hydraulic Drive Motor is 3/4" Inlet and Outlet - Pump is 3/4" F Inlet 3/8" F Outlet
|
 |
| HYD-XW30.10 |
|
|
Max GPM: 8 |
Max LPM: 30.2 |
|
Max PSI: 1450 |
Max Bar: 100 |
|
Motor GPM: 9.5 |
Motor LPM: 36 |
|
Motor PSI: 1800 |
Motor Bar: 124 |
|
|
|
|
|
Hydraulic Motors
|
C.I.D. |
Recommended |
Hydraulic |
Recommended |
Shaft |
| Model |
(CC's) |
Hydraulic GPM |
RPM |
Hydraulic PSI |
Size |
| HYDM116 |
0.71 (11.6) |
7 |
1750 |
2000 |
5/8" |
| HYDM203 |
1.24 (20.3) |
12 |
1750 |
2000 |
5/8" |
| HYDM320 |
1.94 (31.8) |
19 |
1750 |
2000 |
5/8" |
| HYDM322 |
1.97 (32.2) |
22 |
1750 |
2000 |
7/8" |
| HYDM403 |
2.46 (40.3) |
24 |
1750 |
2000 |
1" |
| Biodirectional = Yes |
Port Location = Side |
Seal By-Pass Port = 1/4" |
| Port Size SAE (in/out) = 1-1/16-12 ORB |
|
|
|
|
|
|
|
Hydraulic Base Kits: (Pumps and Motors not included)
|
|
 |
(Compatible with Hydraulic Motors: HYDM116, HYDM203 & HYDM320)
- 12" x 18" x 1-5/8"
- Zinc plated 10 gauge steel - rubber feet
- Pre-drilled for XT, XM, RK, RC & XW series pumps w/standard mounting rails
- Closed couple hydraulic motor flange and spacer (if req) for 5/8" hollow shaft (RC, XT & XM series)
- Misc. hardware
|
|
 |
(Compatible with Hydraulic Motors: HYDM116, HYDM203 & HYDM320)
- 12" x 18" x 1-5/8"
- Zinc plated 10 gauge steel - rubber feet
- Pre-drilled for XM, RK & XW series pumps w/standard mounting rails
- Flange mount w/L095 flex coupler (XM & RK "NL" shaft only)
- Misc. hardware
|
|
 |
(Compatible with Hydraulic Motors: HYDM320)
- 14" x 19" x 1-5/8"
- Zinc plated 10 gauge steel with 2 welded rib supports - rubber feet
- U-Bracket mounting rails
- L100 flex drive coupler
- Coupler shield
- Zinc plated 1/4" steel hydraulic motor mount
- Pre-drilled for XW & RW series pumps
- Misc. hardware
|
|
 |
(Compatible with Hydraulic Motors: HYDM322 or HYDM403)
- 14" x 19" x 1-5/8"
- Zinc plated 10 gauge steel with 2 welded rib supports - rubber feet
- L100 flex drive coupler
- Coupler shield
- Cast iron hydraulic motor mount
- Pre-drilled for XW, SXW & SHP series pumps
- Misc. hardware
|
|
|
| Car Wash Pumps • Plunger Pumps • Tri-Plex Plunger Pumps • High Pressure Pumps • Pressure Washer Pumps • Piston Pumps
|
